USB to 2-Channel RS485 Industrial Grade Isolated Converter
This USB to 2-Channel RS485 converter is made for strong communication with its original FT2232HL chip, providing fast, stable, and reliable data transfer. It supports dual independent RS485 channels, each capable of concurrent communication.
The converter features built-in power supply isolation, eliminating the need for an extra power source for the isolated terminal, and digital isolation for low power consumption. Additionally, it includes a Transient Voltage Suppressor (TVS) to protect against surge and transient spike voltages, making it lightning-proof and anti-electrostatic.
Features
- Adopts original FT2232HL chip, fast communication, stable and reliable, better compatibility
- Extending USB to 2CH RS485, allows concurrent and independent communication for each channel
- Unibody power supply isolation, provides stable isolated voltage and needs no extra power supply for the isolated terminal
- Unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
- TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
- Onboard self-recovery fuse and protection diodes, gives the current/voltage stable outputs, provides over-current/over-voltage proof, improves shockproof performance
- Built-in 120R terminal resistor on the RS485 ports, configurable via jumper for flexible switching
- 3 LEDs for indicating the power and transceiver status
- Industrial rail-mount ABS case design, small in size, easy to install, and cost-effective
Specifications
| Host Port | USB | |
| Device Port | RS485 | |
| USB | Operating voltage | 5V |
| Connector | USB-B | |
| Protection | 200mA self-recovery fuse, isolated output | |
| Transmission distance | About 5m | |
| Isolated RS485 | Connector | Screw terminal |
| Direction control | Hardware automatic control | |
| Protection | 600W lightning-proof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor) | |
| Transmission distance | About 1.2km(low rate) | |
| Transmission mode | Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) | |
| Baud rate | 300bps ~ 3Mbps | |
| LED Indicators | PWR | Red power indicator lights up when there is a USB connection and voltage is detected |
| TXD | Green TX indicator, lights up when the USB port sends data | |
| RXD | Blue RX indicator, lights up when the device ports send data back | |
| Operating Environment | Temperature | -15℃ ~ 70℃ |
| Humidity | 5%RH ~ 95%RH | |
| Operating System | macOS, Linux, Android, Windows 11/10/8.1/8/7 | |
| Appearance | Enclosure | Rail-mount ABS case, suitable for 35mm DIN rail |
| Dimensions | 81.9 x 54.0 x 32.0mm | |
Resources
- Product Wiki
Pinout
| RS485 Port | Description |
| A1 | PORT1 RS485 Differential signal A+ |
| B1 | PORT1 RS485 Differential signal B- |
| PE | Signal Ground |
| A2 | PORT2 RS485 Differential signal A+ |
| B2 | PORT2 RS485 Differential signal B- |
| PE | Signal Ground |
Sorry, your browser doesn’t support embedded videos.
Package Contents
- 1x USB TO 2-channel RS485 Converter
- 1x USB-A Male to USB-B Male Cable -1.2m
- 1x Screwdriver
