1.54″ three-colour E-Ink display module (200×200)
This is a three-colour (red, black and white) 1.54″ E-Ink display module with a 200×200 resolution, embedded controller communicating via SPI interface.
Due to the advantages like ultra-low power consumption, wide viewing angle and clear display without electricity, it is an ideal choice for low-power projects.
Features
- No backlight – keeps displaying last content for a long time even when power down
- Ultra-low-power consumption – power is only required for refreshing
- SPI interface – for connecting with controller boards like Raspberry Pi/Nucleo etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
Resources
- Product Wiki: https://www.waveshare.com/wiki/1.54inch_e-Paper_Module_(B)
Specifications
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 48mm × 33mm
- Display size: 27.6mm × 27.6mm
- Dot pitch: 0.138 × 0.138
- Resolution: 200 × 200
- Display colour: red, black, white
- Grey level: 2
- Full refresh time: 8s
- Refresh power: 26.4mW(typ.)
- Standby power: <0.017mW
- Viewing angle: >170°
Interfaces
| SYMBOL | DESCRIPTION |
|---|---|
| VCC | 3.3V/5V |
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output, low active |
