Waveshare RP2350 One
This small development board is based on the RP2350/Raspberry Pi Pico 2 powered by a dual-core Arm Cortex-M33 and dual-core Hazard 3 RISC-V, running at up to 150 MHz.
It includes 520KB of memory and 4MB of storage, giving you enough space for your code and data. The USB-A connector lets you plug it straight into your computer without needing extra cables, that’s handy!
The board has 29 GPIO pins and communication protocols like SPI, I2C, and UART, making it compatible with a wide range of devices. It also comes with a colourful RGB LED, a user LED, and buttons for booting and resetting. You can even use its programmable I/O tools if you need to connect something like WS2812B LEDs or more I2C/SPI buses than are available. Â
In regards to programming, you can drag and drop your code over USB, and it works with coding languages like C/C++ and MicroPython. Helpful guides and resources are included to make getting started easy (See our resources section further down)
Features
- RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
- Unique dual-core and dual-architecture design, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V core processor, flexible clock running up to 150 MHz
- Built-in 520KB of SRAM and 4MB of on-chip Flash
- Equipped with a PCB USB-A male connector, allowing for true plug-and-play without the concern of cables
- Castellated module allows soldering directly to carrier boards
- USB1.1 host and device support
- Low-power sleep and hibernation modes
- Drag-and-drop downloads can be made by USB recognition as mass storage
- 29 GPIO pins of RP2350A (20 can be led out through pin headers, and the rest can be led out only by soldering)
- Multiple hardware peripherals
- 2x SPI
- 2x I2C
- 2x UART
- 4x 12-bit ADC
- Controllable PWM channel × 16
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 12x Programmable I/O (PIO) state machines for custom peripheral support
What’s on Board
- PCB Type-A plug
-
RT9013-33GB
500mA low dropout, low noise, ultra-fast LDO -
WS2812
RGB LED - BOOT button
-
W25Q32JVSSIQ
4MB NOR-Flash - RESET Button
-
RP2350A
Dual-core and dual-architecture design, up to 150 MHz operating frequency -
RP2350A pins
10x solder points, including 9x GPIO pins - Debug Pins
Resources
- Product Wiki
- Schematic
Pinout
Package Contents
- 1x RP2350 One
