Olimex ESP32-H2-DevKit-LiPo
The Olimex ESP32-H2-DevKit-LiPo uses an ESP32-H2 module offering multiple protocol support on a single chip. It integrates a 2.4 GHz transceiver compliant with Bluetooth ® Low Energy and IEEE 802.15.4-based technologies, supporting Bluetooth 5 (LE), Bluetooth mesh, Thread, Matter, and Zigbee!
The SoC is powered by a single-core, 32-bit RISC-V microcontroller that can be clocked up to 96 MHz. The module has been designed to ensure low power consumption and security for connected devices. The ESP32-H2 has 320 KB of SRAM with 16 KB of Cache, 128 KB of ROM, 4 KB LP of memory, and a built-in 2 MB or 4 MB SiP flash. It has 19 programmable GPIOs with support for ADC, SPI, UART, I2C, I2S, RMT, GDMA and LED PWM.
Olimex have added dual USB-C to this board for both USB to Serial conversion and USB-C connected directly to the ESP32-H. You’ll also find a LiPo battery connector, Qwiic/Stemma QT connector, RESET and user buttons, user LED and more!
Features
- ESP32-H2-MINI-1 module
- Power consumption 10uA in deep sleep
- USB-C with USB to Serial converter for programming / debugging
- USB-C connected directly to ESP32-H2
- LiPo battery charger and connector
- UEXT connector
- Qwiic/Stemma connector
- Reset button
- User button
- User LED
- All GPIOs available on two headers at 25.4 mm space
- Operating temperature -40+85C
- Dimensions: 48 x 25 mm
Connectivity Features
- Bluetooth supports: Bluetooth Low Energy (Bluetooth 5.3 certified), Bluetooth mesh, Bluetooth Low Energy long range (Coded PHY, 125 Kbps and 500 Kbps), Bluetooth Low Energy high speed (2 Mbps)
- IEEE Standard 802.15.4-2015 compliant
- Supports Thread 1.3
- Supports Zigbee 3.0
- Supports Matter
- Supports HomeKit, MQTT
Resources
Documents
- ESP32-H2-DevKit-Lipo user manual
- EU declaration of conformity
- UKCA declaration of conformity
Hardware
- ESP32-H2-DevKit-Lipo schematic in PDF format
- ESP32-H2-DevKit-LiPo Github repository with KiCAD sources
Package Contents
- 1x ESP32-H2-DevKit-LiPo board