0.96″ IPS LCD Display Module (160×80)
This 0.96″ IPS LCD module from Waveshare is a great way to add a teeny-tiny, high-quality display to your project.
The display has a 160×80 resolution and offers 65K RGB colours via its IPS display. The module is controlled via SPI thanks to the embedded ST7735S driver.
The handy mounting holes make it easy to incorporate into a custom panel or 3D printed enclosure, and the online development resources make it easy to get up and running on a Raspberry Pi or Arduino board.
Features
- 0.96″ LCD Display
- 160×80 resolution
- 65K RGB colours
- Clear and colourful display
- SPI interface minimizes required IO pins
- Supports controller boards such as Raspberry Pi and Arduino
- Online development resources (examples for Raspberry Pi/Arduino)
- Dimensions: 32.5mm x 26mm
Package Contents
- 1x 0.96″ LCD Module
- 1x PH2.0 8-pin 20cm cable
Resources
- Product Wiki
Pinout
| SYMBOL | DESCRIPTION |
|---|---|
| VCC | Power (3.3V input) |
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Tech Specs
- Operating voltage: 3.3V
- Interface: SPI
- LCD type: IPS
- Display Colour: RGB, 65K Colour
- Controller: ST7735S
- Resolution: 160×80
- Backlight: LED
