SIM808 GPS/GPRS/GSM Shield For Arduino [Discontinued]
What’s it for:
- Send and receive GPRS data (TCP/IP, HTTP, etc.)
- Receive GPS data and A-GPS data
- Send and receive SMS messages
- Make and receive phone calls
Use SIM808 Arduino shield is quick and easy. With intuitive functions packaged into a single library, you can focus on your project and not waste time studying complex AT commands.
Specification
- Quad-band 850/900/1800/1900MHz – 2G GSM network
- GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
- GPRS mobile station class B
- GPS Receiver channels: 22 tracking / 66 acquisition
- Coarse/Acquisition code: GPS L1
- Tracking sensitivity: -165dBm
- Time-To-First-Fix: Cold starts: 30s (typ.), Hot starts: 1s (typ.), Warm starts: 28s (typ.)
- Horizontal position accuracy: < 2.5m CEP
- Update rate: 5Hz
- Supports Real-Time Clock
- Uses standard SIM Card holder
- Operating voltage: 5V
- Input Power: 7-23V
- Support AT command control (3GPP TS 27.007,27.005 and SIMCOM enhanced AT Commands)
- Support LED status indicator: Power supply status, network status and operating modes
- Working environment: -40 ℃ ~ 85 ℃
- Size: 69 * 54mm/2.71 * 2.12 inches
- Weight: 50g
Documents
- Wiki (SIM808 GPS/GPRS/GSM Shield For Arduino)
- SIM808_Shield library on GitHub
- SIM808 Command Manual
- SIM808 GNSS Application Note
- SIM808 Hardware Design V1.02
- SIM808 SPEC
- TEL0097 Schematic
Shipping List
- SIM808 GPS/GPRS/GSM Shield x1
- GPS Antenna x1
- GSM Antenna x1